Removing Striker Plate; Removing Latch Indicator - Electrolux EIGD55H Technical & Service Manual

Installation Information

Removing Striker Plate

1. Remove 2 long, course-thread, counter-sunk screws
and striker plate. (See Figure 2-33)
2. Set the striker plate to the side for later.
Figure 2-33.

Removing Latch Indicator

1. Grasp the indicator on the latch side between finger
and thumb and rock it upward, pivoting away from
the center of the glass. (See Figure 2-34)
2. Gently push the indicator toward the center of the
lens to release the tab.
3. Rock the tab upward. (See Figure 2-35)
4. Pull the indicator out and set it aside.
(See Figure 2-36)
2-18
Figure 2-34.
Figure 2-35.
Figure 2-36.