Options; Add Steam (Steam Models Only); Extended Tumble; Wrinkle Release (Iq Touch) - Electrolux EIGD55H Technical & Service Manual

Electronic Control

Options

Suitable options will automatically be indicated when the
cycle is selected.
To add options, press the corresponding options buttons
to illuminate the selections desired. To delete options,
press the options buttons again and the indicator lights
will turn off. Not all options are available with every
cycle. The indicator will not light if the option is not
available with that Cycle.
All options selected for the cycle, except sanitize, will be
remembered and recalled each time that cycle is
selected in the future. To prevent unintentional and
accidental exposure of delicate material to sanitize heat,
the sanitize option will not be remembered and must be
reselected each time.

Add Steam (steam models only)

The add steam option injects steam into the clothing
prior to cool down to reduce wrinkling, ironing and static
cling.

Extended Tumble

Select the extended tumble option if the dried load might
not be removed promptly at the end of the cycle. The
dry load will tumble continuously without heat for 30
minutes. "Ext. Tumble" will be displayed and a chime
will sound every 5 minutes to remind you to remove the
dried load. The wrinkle release option can be selected
with extended tumble to increase the amount of time the
load will tumble without heat.

Wrinkle Release (IQ Touch)

Select the wrinkle release option if the dried load might
not be removed promptly at the end of the cycle. To
help prevent wrinkles, the dry load will intermittently tum-
ble for a total of 45 minutes. "Wrinkle Rel." will be dis-
played and a chime will sound every 5 minutes to remind
you to remove the dried load.
The extended tumble option can be selected with wrinkle
release to add another 30 minutes of tumbling without
heat.

Wrinkle Release (Wave Touch)

The wrinkle release option helps prevent wrinkles and
tangling by alternately tumbling the load without heat
for 5 minutes in a clockwise direction, then 5 minutes in
a counterclockwise direction, for a total of 45 minutes.
A signal will sound every 5 minutes to remind you to
Add steam option available on Steam Model only.
remove the dry load at any time.
3-10