Reset (Wavetouch™); Reset (Iqtouch™); Contrast - Electrolux EIGD55H Technical & Service Manual

Electronic Control
Reset (WaveTouch™)
Press the buttons indicated to restore only cycle settings,
reset only factory preferences (users, language, bright-
ness, volume, etc.) or restore all factory defaults (both
cycle settings and factory preferences). Press the button
under EXIT to return to normal operation or press the
cancel button to turn the dryer off without making any
changes. If you do not make a selection within 30 sec-
onds the dryer will return to normal operation without any
changes. If you reset all settings, INSTALL CYCLE will
be displayed as though the dryer were just turned on for
the first time. Press the button under CANCEL if you do
not wish to rerun the INSTALL CYCLE.
Reset (IQTouch™)
To return to factory settings, press the temperature
and dryness buttons at the same time and hold for 5
seconds.

Contrast

Press the button beneath plus (+) or minus (-) symbols to
increase or decrease the contrast of the display. Press
select to accept the change or press the button under
EXIT to return to normal operation without any changes.
3-16