AAT Movilino User Manual page 33

8.3.1 Charging with the automatic charger
To charge the batteries you may leave the battery pack in its bag attached to
the wheelchair. First pull the plug of the power cable then insert the plug of
the charger entirely into the charging socket. Finally plug the charger into
the wall outlet.
F
Since the movilino is supposed to be connected to the charger at all
times whenever it is not in use, you need to remove the charger from
the wall outlet and pull the plug from the charging socket on the bat-
tery pack every time before you use it.
F
Before charging, please read and follow all instructions and warning
notes printed on the
F
Exclusively use the AAT Alber Antriebstechnik GmbH charger!
F
Never touch the plug with moist hands!
Signals of the charger
charger
charger
8.3.2 Charging batteries in your vehicle
By means of the voltage voltage converter you may even charge your battery
pack while driving your car.
First remove the power cable. Then fully insert the plug of the charger into
the charging socket on the battery pack. Then connect the charger to the vol-
tage voltage converter. Finally you plug the voltage converter into the cigaret-
te lighter.
Afterwards you first pull the voltage converter's plug from the cigarette
lighter before you disconnect it from the charger.
Signals of the charger and the voltage converter
charger
charger
voltage converter
charger.
LED orange
LED green
LED orange
LED green
beeping
batteries are being charged
batteries are fully charged, maintenance mode
batteries are being charged
batteries are fully charged, maintenance mode
12 V supply is low
33
movilino