Assembly
1. Assemble input shaft assembly.
1. Governor plate
2. Governor base
IMPORTANT: To prevent the screws that secure the
governor plate to the governor from loosening, ap-
ply Loctite Blue No. 242 or equivalent to the screw
threads.
IMPORTANT: Make sure to press ball bearing at the
inner race to prevent damaging the ball bearing.
Workman 1100/2100/2110
1
2
Figure 51
2
Figure 52
1. Ball bearing
2. Input shaft
Page 5 – 33
4
3
12 to 16 in–lb
(1.4 to 1.8 N–m)
3. Screw
4. Governor sleeve
A. Secure governor plate unit to the governor base
with screws. Torque screws from 12 to 16 in–lb (1.4
to 1.8 N–m).
1
B. Press ball bearing onto the input shaft.
Drive Train