Toro Workman 1100 Service Manual page 80

1. Ball bearing
IMPORTANT: Do not reuse ball bearings that have
been removed.
1. Governor plate assembly
IMPORTANT: Make sure not to damage the screw
heads when removing screws. Each screw is se-
cured with an adhesive.
Drive Train
Figure 40
2. Input shaft
B. Remove ball bearing from the input shaft with a
bearing puller.
2
Figure 41
2. Governor base
C. Remove screws securing the governor plate as-
sembly to the governor base.
Page 5 - 26
1
2
1
Workman 1100/2100/2110