Power Switch < 4 Sec - Acer AcerPower Flex4000 Series User Manual

IDE Hard Disk Standby Timer
This parameter allows the hard disk to enter standby mode after inactivity of 1 to 15
minutes, depending on your setting. When you access the hard disk again, allow 3 to 5
seconds (depending on the hard disk) for the disk to return to normal speed. Set this
parameter to Off
default is Off.
System Sleep Timer
This parameter sets the system to the lowest power-saving mode. It automatically enters
the sleep or the suspend mode after a specified period of inactivity. Any keyboard or
mouse action detected resumes system operation. For this option to function under OS
operation, no system activity must be detected. The default is Off.
Sleep Mode
This parameter tells the system which sleep mode (Standby or Suspend) to enter into
when the System Sleep Timer times out.
2.5.2 Power Switch < 4 sec.
When set to Power-off,
pressed. When set to
Mode will function after completing POST. Until then, the switch must be held for
greater than 4 seconds. The default is Power-Off.
2.5.3 System Wake-up Event
The system wake-up event allows the system to resume operation when the modem ring
indicator is enabled.
if your hard disk does not support this function or to disable. The
the system automatically turns off when the power switch is
Suspend , the system enters the suspend mode. The Power Switch
Index