Acer AcerPower Flex4000 Series User Manual page 137

setup, 2-20, 2-22, 2-23
Positioning the removable feet, 3-2
Positioning the System housing, 3-2
Power management, 2-25
Power management mode, 2-25
Power switch < 4 sec, 2-26
System wake-up event, 2-26
Power supply, installing, 3-17
Product information, 2-8
PS/2 mouse, 2-7
R
Rear panel features, 3-6
Reconfiguring the system, 1-18
Reinstalling the disk drive metal frame, 3-14
Removing a DIMM, 1-18
Removing the disk drive metal frame, 3-9
S
Save CMOS settings, 2-27, 2-28
Second-level cache, 1-19
Serial port 1, 2-6
Serial port 2, 2-6
Setup password
bypassing, 2-23
changing, 2-22
removing, 2-22
setting, 2-20
Setup utility, exiting, 2-27
Software installer, 4-4, 4-5, 4-6
Supported video resolutions, 1-20
System board, 1-1
Audio function, 1-21
DIMM, removing, 1-18
Error conditions, correcting, 1-25
Error messages, 1-21, 1-22
ESD precautions, 1-11
Installing, 3-15
Installing memory, 1-15
Jumpers and connector locations, 1-4
Layout, 1-2
LED/switch locations, 1-10
Reconfiguring the system, 1-18
Second-level cache, 1-19
Supported video resolutions, 1-20
Video function, 1-19
System housing, 3-1
Component installation, 3-9
Cover installation, 3-20
ESD precautions, 3-8, 3-9, 3-18
Front panel features, 3-5
Installing a 3.5-inch diskette drive, 3-12
Installing a CD-ROM drive, 3-13
Installing a hard disk drive, 3-11
Installing a system board, 3-15
Installing expansion boards, 3-18
Installing the cover, 3-20
Installing the power supply, 3-17
Opening the housing, 3-7
Positioning, 3-2
Positioning the removable feet, 3-2
Rear panel features, 3-6
Reinstalling the disk drive metal frame, 3-
14
Removing the disk drive metal frame, 3-9
System board, installing, 3-15
System information, 2-3
Abort settings change, 2-28
Boot options, 2-16
Disk drive control, 2-19
Exit Setup utility, 2-27
External cache, 2-5
Floppy drive A, 2-5
Floppy drive B, 2-5
IDE primary channel master, 2-5, 2-13
IDE primary channel slave, 2-5, 2-13
IDE secondary channel master, 2-6, 2-13
IDE secondary channel slave, 2-6, 2-13
Internal cache, 2-4
Load previous BIOS settings, 2-27
LS-120 drive (optional), 2-12
Memory parity mode, 2-7
Parallel port, 2-7
Password setup, 2-20, 2-22, 2-23
Power management, 2-25
Power-on password, 2-24
Index