Component Installation - Acer AcerPower Flex4000 Series User Manual

3.6

Component Installation

3.6.1 Removing the Disk Drive Metal Frame
You can install one 3.5-inch diskette drive, one CD-ROM drive and one 3.5-inch hard
disk drive in the disk drive metal frame.
To remove the disk drive frame from the housing:
1. The metal cover inside the housing gives additional support to the housing's
structure. To remove the metal cover, remove the two screws connecting the metal
cover to the riser card. Then insert two fingers into the hole. Gently draw it back as
you lift it up.
AcerPower Flex4000 Series (V59LA/IDB3-C) User's Guide
Make sure to turn off the power and
unplug the power cord before
installing or removing any
components.
Observe the ESD Precautions (see
section 3.5) before installing a
system component.