Table of Contents
Advertisement
2.4
Power Saving Configuration
The Power Saving Configuration parameters are configurable only if
your system supports the power management feature.
The following screens show the Power Saving Configuration
parameters and their default settings:
Power Saving Configuration
Power Management Mode ................[Enabled ]
*Monitor Power Saving Timer .......[15] Minute(s)
*IDE Hard Disk Standby Timer ..... .[15] Minute(s)
*System Standby Timer .............[OFF]
*System Suspend Timer .............[OFF]
Monitored Activities
IRQ 2/IRQ 9. . .[Disabled]
IRQ 3.........[Disabled]
IRQ 4.........[Disabled]
IRQ 5.........[Disabled]
IRQ 7.........[Disabled]
IRQ 10........[Disabled]
IRQ 11........[Disabled]
*IRQ 12........[Enabled ]
*IRQ 15........[Enabled ]
¯ = Move Highlight Bar,
PgDn/PgUp = Move Screen,
2-16
DRQ 0.........[Disabled]
DRQ 1.........[Disabled]
DRQ 3.........[Disabled]
DRQ 5.........[Disabled]
DRQ 6.........[Disabled]
DRQ 7.........[Disabled]
® ¬ = Change Setting
F1 = Help,
Esc
=
Page 1/1
Exit
User's Guide
Advertisement
Table of Contents
