Chapter 2 Bios Utility; Entering Setup - Acer AcerPower Flex4000 Series User Manual

Most systems are already configured by the manufacturer or dealer. There is no need to
run Setup when starting the computer unless you get a Run Setup message.
The Setup program loads configuration values into the battery-backed nonvolatile memory
called CMOS RAM. This memory area is not part of the system RAM.
Before you run Setup, make sure that you have saved all open files. The system reboots
immediately after you exit Setup.
2.1

Entering Setup

To enter Setup, press the key combination
BIOS Utility
If you repeatedly receive Run
Setup messages, the battery may
be bad. In this case, the system
cannot retain configuration values
in CMOS. Ask a qualified
technician for assistance.
+ + .
Index