Installing Memory; Installing A Cpu; Attaching The Heatsink And Fan To The Cpu; Memory Configurations - Acer AcerPower Flex4000 Series User Manual

Figure 1-3 Installing a CPU
4. Attach the heatsink and fan to the CPU.
Figure 1-4 Attaching the Heatsink and Fan to the CPU
5. Plug in the fan cable to the fan connector on the system board. See section 1.2 for the
location of the fan connector.
1.5

Installing Memory

The system memory is expandable to 256 MB by adding dual in-line memory modules
(DIMMs). See Figure 1-1 for the location of the DIMM sockets. Section 1.5.1 tells how
to install DIMMs.
The two 168-pin DIMM sockets on board accept 8, 16, 32, 64, and 128 MB SDRAM
DIMM modules with or without ECC functions. The ECC function enables the system to
automatically detect and correct data errors.
Table 1-7 lists the possible memory configurations.
Table 1-7

Memory Configurations

DIMM 1 DIMM 2 Total Memory
AcerPower Flex4000 Series (V59LA/IDB3-C) User's Guide