2.5
Power Saving Configuration
The Power Saving Configuration parameters are configurable only if
your system supports the power management feature.
The following screen shows the Power Saving Configuration
parameters and their default settings:
Power Saving Configuration
Power Management Mode ................[Enabled ]
IDE Hard Disk Standby Timer .......[15] Minute(s)
System Standby Timer ..............[15] Minute(s)
System Suspend Timer ..............[15] Minute(s)
Monitored Activities
IRQ 3.........[Disabled]
IRQ 4.........[Disabled]
IRQ 5.........[Disabled]
IRQ 6.........[Enabled ]
IRQ 7.........[Disabled]
IRQ 8
[Disabled]
¯ = Move Highlight Bar,
PgDn/PgUp = Move Screen,
2-20
IRQ 9.........[Disabled]
IRQ 10........[Disabled]
IRQ 11........[Disabled]
IRQ 12........[Enabled ]
IRQ 14........[Enabled ]
IRQ 15........[Disabled]
® ¬ = Change Setting
F1 = Help,
Esc
=
Page 1/1
Exit
User's Guide