Table of Contents
Advertisement
5.6.3
Adjusting rear suspension compres-
sion damper hydraulic device
Adjusting of the compression damper is made in
jerks. Turn the rule (D) clockwise to increase the
braking action, or turn anticlockwise to decrease it.
REAR SUSPENSION
Spring length
Rebound damper
Compression damper
NOTE:
Adjusting of the preload starts from the damper
spring length of 141mm (5.55 in).
The compression and rebound adjustment
starts from the "all close" position (direction +).
6
Maintenance
6.1
Tables of scheduled maintenance and checks
WARNING
• Impropriety or lack of recommended maintenance operations can lead to an increase
of the risk of accidents and damage to the motorcycle.
• Always use genuine Benelli spare parts. Using non-genuine spare parts can accele-
rate the wear of your motorcycle and shorten its life.
• Failure to perform the recommended operations, as well as using non-genuine spare
parts, can cause the unoperativeness of the legal guaranty.
To replace or top up the lubricants and fluids of your motorcycle, use only the suitable
products.
PROTECT THE ENVIRONMENT
Benelli, in order to protect the interests of the community, awakens the Customers and
the Technical Assistance operators to use the vehicle and dispose of its replaced parts
respecting the laws in force concerning environmental pollution and waste disposal and
recycling.
The main periodic checks and maintenance operations are shown in the following tables. These opera-
tions are necessary to keep the motorcycle safe and in perfect running order.
Standard configuration
141 mm (5.55 in)
32 clicks
18 clicks
-
-
+
+
D
D
141 mm
(5.55 in)
51
52
Hide quick links:
Advertisement
Table of Contents
