Benelli TORNADO Tre Novecento 900 Owner's Manual page 17

4.3 Running-in
Failure to observe the indications provided below can reduce performance and shorten
the life of the motorcycle.
Running-in is generally considered to apply only to the engine. In fact, it should be regarded as an
essential phase for other important parts such as the tyres, the brakes and the drive chain. During the
very first miles, adopt a relaxed riding style.
km rpm max.
0 to 500 Km 5000 rpm
(0 to 312.5 mi)
500 to 1000 Km
(312.5 to 625 mi) 7500 rpm
1000 to 2500 Km
(625 to 1562.5 mi) 9000 rpm
IIn particular, observe for the first 2500 km (1600 mi) the max revolutions number indicated in the table.
After the running-in period, above 2500 km (1600 mi), the engine is "hot" and can be run to its maximum
speed.
4.4 Selecting the display functions
WARNING
Any modification or adjustment of the
display functions must be performed
with the key turned to "ON".
The display is provided with 3 main functions:
1) "Total"/"Trip"
2) "Chrono"/"Lap"
3) "Clock"/"Trip"
To switch from function 1 to function 2, keep pres-
sed the "Mode" button for more than two seconds.
To switch from function 2 to function 3, keep pres-
sed the "Mode" button for more than two seconds
(with chronometer off).
To switch from function 3 to function 1, keep pres-
sed the "Mode" button for less than two seconds.
New tyres must undergo a proper running-in period to
reach their complete efficiency. Avoid abrupt acceleration,
turning and braking during the first 100 km (62,5 mi). Fai-
lure to observe these prescriptions can lead to the sliding
of the wheels and the loss of control of the vehicle with
subsequent risk of accidents
Note
1
1) "Total"/"Trip"
Total
°C
Trip °F
2 (Mode>2sec)
2) "Chrono"/"Lap"
Chrono
Lap °C
°F
3
(Mode>2sec with chronometer off)
3) "Clock"/"Trip"
Clock
°C
°F
Trip
(Mode<2sec)
1
29
30