Adjusting Front Suspension Compression Damper Hydraulic Device; Adjusting The Rear Suspension - Benelli TORNADO Tre Novecento 900 Owner's Manual

5.5.3 Adjusting front suspension compres-
sion damper hydraulic device
Adjusting of the compression damper hydraulic
device is made in jerks. Turn the rule (C) clockwise
to increase the braking action, or turn anticlockwise
to decrease it.
FRONT SUSPENSION
Spring preload
Rebound damper
Compression damper
NOTE:
Start adjusting the preload from the "all open"
position (direction - ).
The compression and rebound adjusting starts
from the "all close" position (direction +).
5.6

Adjusting the rear suspension

Standard configuration
7,5 turns
(range max.15 turns)
2,5 turns
1,5 turns
+
+
-
-
Compression damper
hydraulic device
Spring preload
Rebound damper hydraulic device
C
Scatti Scatti
47
48