Cleaning; Lubrification; Checking The Idle Speed - Benelli TORNADO Tre Novecento 900 Owner's Manual

6.9.1

Cleaning

The chain of Tornado is of the O-ring type. To prevent it from damaging, never clean the chain with a
steam or high pressure water jet, nor using gasoline or other solvents.
The chain must be cleaned using kerosene only.
Kerosene is highly toxic and flammable.
Avoid contact and inhalation.
Keep kerosene away from sparks and flames.
Keep kerosene out of reach of children and domestic animals.
Correctly dispose of exhaust kerosene, in order to avoid environmental pollution.
If you are not sure that you can use kerosene in complete safety, don't use it and, when you can go to a
Benelli authorized service center ask for the drive chain cleaning.
6.9.2

Lubrification

Chain lubrication has to be performed only by a Benelli authorized service center according to the inter-
vals specified in the tables of scheduled maintenance.
It is also necessary to perform this operation after riding under the rain and after cleaning the motor-
cycle. Riding your motorcycle when the drive chain is in poor condition or improperly adjusted can lead
to accidents.
To ensure proper operation, the drive chain needs to be properly lubricated.
6.10

Checking the idle speed

The idle speed should range from 1200 to 1300
rpm.
If a tune-up is necessary, contact an authorized ser-
vice centre.
77
78