Benelli TORNADO Tre Novecento 900 Owner's Manual page 19

4.7 Saddle disassembly driver
Insert the key.
Press the end part of the saddle and, at the same
time, turn the key clockwise.
Slightly lift the saddle from the rear, slide it back-
wards and remove it.
4.8 Saddle disassembly passenger
Insert the key.
Press the end part of the passenger saddle and, at
the same time, turn the key counterclockwise.
Slightly lift the saddle from the rear, slide it back-
wards and remove it.
4.9 Removing the passenger saddle tail
Remove the complete saddle tail by following the
"Disassembly saddle
Then separate the tail from the saddle by pressing
outwards against the tabs, releasing the rear sec-
tion of the saddle first followed by the front section.
Use the reverse procedure to reassemble.
passenger" instructions.
Keys
supplied
Keys
supplied
33
34