Dgps Port; Output Format Window (Port 2) - Furuno GP-1650WF Installation & Maintenance

3. INITIAL SETTINGS

DGPS port

Set the following when connecting with DGPS beacon receiver GR-80 or the DGPS beacon
receiver is incorporated, PC to the DGPS port.
Note: Signal level for DGPS port is RS232C.
1. Press the [MENU] key.
2. Press the CONFIGURATION soft key.
3. Press the SETUP NMEA/DGPS PORT 2 soft key.
4. Select FORMAT, and then press the EDIT soft key.
The following window appears.
5. Select NMEA version. The selected item is indicated by black button.
NMEA0183 Ver1.5/2.0:
RTCM104 (EXTERN):
RTCM104 (INTRN):
RTCM104 (OUTPUT):
Note 1: Note that you cannot setup sentences when you select RTCM104 at the format.
Note 2: For RS-422 format, the level converter (IF-1432) is required for connection of
external equipment.
6. Press the ENTER soft key.
7. Press the [PLOT] key to finish.
3-2
OUTPUT FORMAT
FORMAT
NMEA0183 Ver1.5
NMEA0183 Ver2.0
RTCM104 (EXTRN)
RTCM104 (INTRN)
RTCM104 (OUTPUT)
DGPS 3D

Output format window (PORT 2)

Select one when connecting PC or RS-232C equipment.
Select this when connecting external DGPS beacon receiver.
Select this for built in internal DGPS beacon receiver.
Select this when outputting differential data of the internal
DGPS beacon receiver to other GPS navigator.
SETUP
PORT2
NMEA 0183
VER 1.5
ENTER
CANCEL