Hobby ONTOUR Series Operation Manual page 50

6. Interior structure
Pushlock safety catch
Widening the seating bench
Fold-away bed above the centre seating
arrangement
1
Fold-away bed, closed
4
Fold-away bed, open
Bed expansion in the seating arrangement
(or model-specific)
In some models, the narrow section of the seating arrangement can
be widened into a bed.
1
Conversion
• Press the pushlock
• Lay flap
• Place flap
2
Carry out this procedure in reverse order to convert the bed back
into the seating arrangement.
3
Fold-away bed, centre seating arrangement*
To make the centre seating arrangement more comfortable, fold in
the fold-away bed before sitting down.
To convert into a bed
• Release the locks
away bed.
• Using two people, slowly lower the fold-away bed to the sup-
ports
• Set up the safety panel
falling out.
2 • Insert the second mattress.
• Hang the ladder (stored in the clothes cupboard when the cam-
per is delivered) in the handle
stands firmly.
To convert back
• Remove the ladder
• Place the mattresses on top of each other.
• Fold down the safety panel
• Fold up the fold-away bed and push it upwards.
3
• Shut the locks
to unlock the flap.
j
fully on the floor in order to raise flap
l
under the stop on flap
l
When driving, push the bed expansion back into place
and use the pushlock to lock it.
The upper fold-away bed can hold a maximum load of
50 kg.
While driving, the fold-away bed must always be folded
up and locked into place.
We recommend always using two people to fold the
bed in or out.
on the left and right-hand side of the fold-
j
and fold it out into a bed.
k
to protect the person sleeping from
l
and store it securely.
m
l
.
j
*
k
and hook into place.
k
and ensure that the ladder
m
.
.
46