Entry Step Tread; Service Flap - Hobby ONTOUR Series Operation Manual

Plissé and the insect screen

Entry step tread

Service flap

Opening and closing the service flap
35
Pull the plissé
1
entry door to the desired position. To open, carefully
guide the rail back to the original position in order to
fold the plissés correctly.
2
Entry step tread
When entering and exiting the vehicle:
• Place step tread in front of the entry door to the caravan.
• Ensure that the step tread is placed on a level surface; this
prevents the step tread from falling over.
Note the varied tread heights and, when exiting, en-
sure you will step onto firm and even ground.
Service flap
To open
• Unlatch the lock with the key.
• Hold the locking knob between your thumb and index finger
and press firmly.
• Open the flap downward.
To close
• Close the flap upward.
• Press the flap on the upper left and right-hand corners to ensu-
re that all of the locks actually click into place.
• Latch the lock with the key.
All of the fastenings on the service flap must lock into
place when closing to ensure that the flap will always
be closed tight. If the flap is not closed correctly, it
could become permanently deformed, especially
when the caravan stands unused for a longer period
of time.
Spray the sealing gaskets of the service flaps regu-
larly with silicon to ensure that they will always move
easily and operate reliably.
5. Exterior structure
and the insect screen
k
on the
j