Hobby ONTOUR Series Operation Manual page 109

1 2
Operating the oven
105
1
2
3
4
3 4
Turning on the oven
• Switch on the 12 V power supply using the main switch on the
control panel.
• Open the main shutoff valve on the gas bottle and the gas shut-
off spigot marked "oven".
• Open the oven door completely.
• Position the baking tray or grill so that it is not in direct contact
with the flame.
• Lightly press on the adjusting knob and turn it to the desired
ignition position (oven or grill).
• Press the adjustable knob. Gas will flow to the burner and the
ignition will light the flame.
• Keep pressing the adjustable knob for 10 seconds until the
ignition safety valve keeps the gas supply open.
• Let go of the adjusting knob and turn it to the desired tempera-
ture (oven only).
• The flame must burn steadily. The colour should be mainly blue
and the flame should
• Turn the adjustable knob to the zero position. The flame will go
out.
Turning off the oven
• Turn the adjustable knob to the zero position. The flame will go
out.
• Close the main shutoff valve on the gas bottle and the gas shu-
toff spigot marked "oven".
Igniter
Oven
Adjustable knob
Grill
Please refer to the separate manufacturer's opera-
ting manual.
have a clear outline.
• If it has not ignited, repeat this procedure from step 1.
• Should the flame on the burner accidentally be
extinguished, turn the switch back to the neutral
position and leave the burner off for at least one
minute before igniting it again.
10. Built-in devices