Setting Job Properties; Ipp Printing; Ipp Client - Tally Xpress T9412i Network User's Manual

If this option is selected and there is at least one property
which cannot be applied to the document, the printer will not
print the document.
If this option is not selected, the printer prints the document
with only the applicable properties. The user should select
this option to print a document only when all specified
properties can be applied to the print job.

Setting Job Properties

Properties, under the Printer menu, allows the user to set the
print job properties. the properties window shows job
properties that can be modified.
The modified properties, which should be supported by the
printer, can be transmitted with the document to be printed.
The user can type the values of the properties or select them
from the list.
In general, it is recommended to specify the DF (Document
Format) property as "application/octet-stream," which
enables the automatic document format recognition function
for printing. After setting job properties, they are transmitted
with the document to be printed.
50 Chapter 8, Network Software

IPP Printing

For Internet printing using a conventional printing method,
the user can utilize the IPP PortMonitor after installing the
IPP Client. To use the functions supported by IPP, the user
can use the installed IPP Client.

IPP Client

The IPP Client may transmit the print file created by the
printer driver or a pure text file to the printer. the pure text
file can be created without any specific process. But the print
file should be created with the following procedures.
Converting a Document to a Print File
1. Open the document to be printed using the appropriate
program.
2. Select the print function.
3. Choose Print to File in the Print dialog window.
4. Click on Print.
5. Type the file name to be saved in the window.
6. Select OK to save the print file made from the document.
Add Document
The user can add to the print file to be printed from the IPP
Client. To add documents to be printed click on the Add
button in the Document Management window.
Specifying a Printer
The user can specify the printer by specifying the printer's
address in the Links field of the Address Bar.
Job Properties Configuration and Customization
The user can specify or customize the print job properties
after document addition and printer specification.
Print
Click on the Print icon, or click on the Print Job button from
the Operations menu to transmit the document to the printer.