Tally Xpress T9412i Network User's Manual page 22

4. Select the Details tab.
5. In the Add Port dialog box, select Add Port then choose
the Other radio button.
6. Highlight Tally Network Printer Port on the list. Click
OK.
7. Select printer and click OK.
8. Select the General tab and print out a test page to make
sure you have added the printer.
9. Click Apply.
LPR P
RINTING
Setting LPR Printing on an NT Network
The following procedure can be used to set up the LPR
spooler for a Windows NT 4.0 workstation/server.
1. In the Windows Network control panel, install the
Microsoft TCP/IP Printing service.
2. Use the Windows Add Printer wizard to install the
Xpress printer driver for Windows NT 4.0.
note:
Xpress printer drivers are provided on the Xpress
T9412 Series Solutions CD that came with the printer.
3. In Windows NT 4.0, click the Start button, select
Settings, then select Printers.
4. Select the Tally Xpress T9412 printer icon, and then
select Properties from the File menu.
5. Click on the Ports tab.
6. Select Add Port.
7. Under Available Printer Port, select LPR Port and click
the New Port button.
8. In the Name or address of the printer providing lpd
field, enter the IP (Protocol) address of the printer. For
example, 128.191.184.50.
9. In the Name of printer or print queue on that server
field, enter (the word PORT must be in
PORT1
uppercase). Click OK, then click Close to assign that
newly created port to the Xpress printer.
10. Print a test page.
16 Chapter 4, Windows Networks
S P
HARED RINTING
Shared Printing in Windows
Follow these steps to set up shared printing in Windows 95/
98/Me/NT/2000.
1. Install the printer as a local printer using LPT1 port.
2. Press the Windows Start button, select Settings, then
select Control Panel.
3. In the Control Panel window, double-click the Network
icon.
4. Click on the File and Print Sharing... button. In the
dialog box that appears, make sure that I want to be able
to allow others to print to my printer(s) is checked.
5. Click OK in the File and Print Sharing dialog box and
then click OK in the Network window.
6. Click Yes through any menus that appear and let the
program re-start the computer for the changes to take
affect.