Tally Xpress T9412i Network User's Manual page 31

Now you can configure the individual print clients. See the
following sections for instructions.
• To configure a Windows 95/98/Me Client, see below.
• To configure a Windows NT Client, see below.
• To configure a Windows 2000 Client, see page 26.
C P
ONFIGURING
Windows 95/98/Me Clients
To begin installing the Tally Xpress T9412i(n) printer driver,
select Add Printer in the Printers folder (Start –> Settings –>
Printers –> Add Printer) to add the desired driver.
1. Click Next in the first Add Printer Wizard window.
2. Select Network printer and click Next.
3. Type the network path or the queue name of the printer.
If you don't know its name, click Browse to view
available network printers.
note:
Choose any print queue on Windows NT or
NetWare servers that you have access rights.
4. Navigate on the network to select the NetWare server
queue created for the Tally Xpress T9412. Select the
network printer you want to add and click OK.
5. Click on the Have Disk... button.
6. Click on the Browse button to navigate the Xpress T9412
Series Solutions CD to one of the following locations.
PCL6:
XpressT9412i(n)\Windows 98\Printer
Driver\PCL6 Printer Driver\PlugnPlay
PS:
XpressT9412i(n)\Windows 98\Printer
Driver\PS Printer Driver\PlugnPlay
Select the appropriate printer driver.
You are now ready to print to the Xpress T9412i(n) through
the NetWare server queue.
D
RINTER RIVERS
Windows NT Clients
There are two ways of attaching the Xpress printer driver in
Windows NT to a NetWare queue. You can use the Network
Printer Server Port method or the Captured Printer Port
method.The Network Printer Port command is the
recommended method for assigning a NetWare queue to
your printer driver. Windows NT will not allow the user to
change the name of this network printer. The created printer
icon will have the queue's name instead of the driver's name.
Performance on the other hand, should be better using the
Network Printer Server Port instead of the Captured Printer
Port.
Network Printer Server Port
1. From the Windows Start button, select Settings, then
Printers.
2. Double-click on the Add Printer icon.
3. Select Network printer server and then Next.
4. In the Connect to Printer window, browse to the printer
queue created for the Xpress T9412, select it, and click
OK.
5. In the warning window, select OK to install the Xpress
T9412 printer driver.
6. Insert the Tally Xpress T9412 Series Solutions CD.
7. Click on the Have Disk... button.
8. Click on the Browse button to navigate the CD to one of
the following locations:
PCL6:
XpressT9412i(n)\Windows NT Printer
Driver\PCL6 Printer Driver\PlugnPlay
PS:
XpressT9412i(n)\Windows NT Printer
Driver\PS Printer Driver\PlugnPlay
9. Double-click on the Plug n Play folder.
note:
If the auto install
program starts when you
insert the CD, press Escape.
Configuring Printer Drivers 25