Tally Xpress T9412i Network User's Manual page 19

Item Description
DHCP Select this item if you want a DHCP server to
assign an IP address to the printer. The IP
address may automatically be changed by the
server. For example, if the printer is restarted.
10. If the STATIC method was selected, in the IP Address
text boxes, type in the IP address for the printer.
• In the Subnet Mask text boxes, type in the subnet
mask.
• In the Default Gateway text boxes, type in the
gateway (router) IP address.
11. If BOOTP or RARP was selected as the IP address
assignment method, restart the printer and go to the next
section.
A IP A
SSIGNING
BOOTP
The installation of a BOOTP program or service may be
required in order to provide BOOTP IP address assignments
on the LAN. The following steps address setting up BOOTP
on Windows NT servers, but the same procedure can be
applied to Solaris, etc.
1. From your Windows NT Server, start your BOOTP
service.
2. Start NPM and highlight the printer that will be using
BOOTP.
3. Double-click on the highlighted printer.
4. From the Network Interface window, click on the TCP/
IP tab.
5. Set the protocol to BOOTP from the pulldown IP
Address Assignment Method field.
6. Click on the OK button.
7. Power OFF your printer, then power it ON.
8. Verify that NPM is now listing your printer with a new
IP address assigned by your BOOTP server.
Assigning IP Addresses Using BOOTP
U
DDRESSES SING
13