Table of Contents
Advertisement
CHAPTER 2
NIC INSTALLATION
I
NTRODUCTION
The Xpress T9412n is already equipped with a Network
Interface Card (NIC). The following NIC kits can be installed
to make the T9412i model printers networkable.
•
Order #083280 for a Network Interface Upgrade Kit for
the PC
•
Order #083282 for a Network Interface Upgrade Kit for
the Macintosh
note:
In the Network Interface Upgrade Kit for the
Macintosh, both a PS SIMM and an industry standard
8MB SIMM are included with the NIC.
Xpress Network Interface Card
I
NSTALLING THE
I
C
NTERFACE
ARD
What You Will Need
You will need to provide the following to install the NIC in
your printer and connect it to your network:
•
A phillips-head screwdriver
•
A category 5 twisted pair cable with RJ-connectors for
10/100Base-T Ethernet
note:
The NIC automatically detects whether you have a
10 Mbps or 100 Mbps Ethernet connection. For better
performance, Tally recommends you use shielded cable
and connectors when connecting to 100 Mbps Ethernet.
Installation Steps
1.
Prepare the printer
2.
Install the NIC
3.
Connect the printer
4.
Review the NIC features
5.
Install the Network Printer Manager
6.
Print out a Network Settings Sheet
N
ETWORK
(NIC)
Introduction
5
Advertisement
Table of Contents
Troubleshooting
