Tally Xpress T9412i Network User's Manual page 16

X N
PRESS ETWORK
M
ANAGER
The Xpress Network Printer Manager (NPM) is a
multipurpose tool for administering networked Xpress
T9412i(n) printers. You can do most of your network/printer
configuration, including IPP setup, with this tool. See page 35
for more details about NPM.
10 Chapter 2, Installing the NIC
P
RINTER
Installing Network Printer Manager
In order to configure the printer, NPM must be installed on
PCs running Windows 95/98/Me/NT/2000.
note:
All previous versions of NPM, such as the NEC
SuperScript 1800, must be uninstalled before installation
of the T9412n Network Printer Manager. Your computer
must then be re-started before proceeding with the
following instructions.
1. Close all open programs on your computer. Insert the
Tally Xpress T9412 Series Solutions CD into the CD-ROM
drive.
2. After reading the Licensing Agreement, click I Accept.
3. Click on the Install option from the T9412i(n) Installer
Main Menu.
4. Click on the Install from CD option.
5. Click on the Custom Install option.
6. Click on the Network Printer Manager option.
7. Click on the Next button at the Welcome screen.
8. Click on the Next button to install NPM on your hard
drive.
9. Click on the Next button to create program icons in the
Program Folder.
10. Click on the Next button to install the Print and
Administrative Client.
11. Click on the Finish button to restart your system.
12. When your NOS is also configured to use the printer,
print out a Network Configuration Sheet by pressing the
Go/Continue button for 4 seconds on the Operator
Panel.