Soft Adjustments; Setting Of Head Temperature (Reference Value) (T2170/T2280 Only) - Tally T2265 SprintPro Maintenance Manual

Soft Adjustments

6.3
Soft Adjustments
6.3.1
Setting of Head
Temperature
(Reference value)
(T2170/T2280 only)
6-12
Necessary tools:
Thermometer
Caution:
Make sure the printhead has room temperature.
– Make sure the printhead has room temperature
– Keep Top Cover Closed
– Press keys ONLINE and SETUP simulaneously while Power On until
TESTMODE is displayed shortly
– Press key "Temp. cal."
Print Temp.cal
Back Next
1 2 3
– Set the actual head temperature (= room temperature) in a range between 15°C
and 30°C using the keys "<" and ">"
Temp.cal=23
Set < > Exit
1 2 3
– Confirm your setting by pressing SET key. The new value is marked with a star
(*). (Leaving the item with key EXIT the value will not be stored)
– Leave TESTMODE by pressing ONLINE key
Recommendation:
You may use normal thermometer with a tolerance of 2 degrees max. Under normal
working conditions you do not need to adjust a yet installed printhead.
Attention:
Do not install/adjust a "hot" printhead.
Remark:
°
0 °C equals 32 F
° °
t =0.55 * ( F-32) C
C
Online
4
Setup
*
Online
4
Setup
° °
t =(1.8 * C+32) F
F
Adjustments
Example:
21 °C 0.55 (70 °F - 23)
70 °F (1.8 20°C + 32)