Instant Cook/Instant Cook Chart - Sharp R-252M Operation Manual With Cookbook

INSTANT COOK
This function allows you to cook 9 popular menus at the touch of a key. (See chart below)
Example: To cook Fresh Fish weighing 450g.
Place the fish in the
microwave, as per
the chart below.
NOTE:
• If the oven has not been used within the last minute, the instant cook function will not work unless the
STOP/CLEAR key has been pressed.
• Your oven comes set for Kg/g mode. For converting to Lb/oz, see weight conversion on page 17.
When action is required (example, to turn food over) the oven stops and the audible signals sound, the
remaining cooking time and any indicator will flash on the display. To continue cooking press the
START/AUTO MINUTE key.
• You can use the LESS/MORE function. See page 13.
• The final temperature will vary according to the initial food temperature. Check the food is piping hot after
cooking. If necessary you can extend the cooking time and change the power level.
INSTANT COOK CHART
MENU WEIGHT RANGE
Fresh Fish 150g, 300g, 450g
(whole, fillets, steaks) (0.15, 0.3, 0.45)
Minced Meat 250g, 500g, 750g
(Beef, Lamb, Pork, (0.25, 0.5, 0.75)
Poultry)
Press the key displaying
fish 3 times until 0.45 is
displayed.
x3
Display:
STIR TURN KG PCS MICRO COOK
COOKING PROCEDURE
• Arrange in a single layer in a large flan dish, cover dish
tightly with microwave cling film and pierce in several
places. Place on the turntable.
• After cooking, leave to stand for 5 minutes before serving.
• Place minced meat in a glass bowl.
• Do not cover.
• Stir when oven indicates.
• Stir and stand for 1-2 minutes after cooking.
NOTE: It is not possible to use the LESS function for minced
meat.
10
After 2 seconds the
oven will start to cook.
(it is not necessary to
press the START/AUTO
MINUTE key)
STIR TURN KG PCS MICRO COOK