Canon iPF830 Series Basic Manual page 64

Front
h Holder Stopper
Secure rolls on the Roll Holder with this part.
i Ink Tank Cover
Open this cover to replace an Ink Tank. (See "Ink Tank Cover (Inside).")
j Control Panel
Use this panel to operate the printer and check the printer status. (See "Control Panel.")
k Release Lever
Releases the Paper Retainer. Lift this lever toward the front of the printer when loading paper.
l Maintenance Cartridge
Ink used for maintenance purposes such as head cleaning is absorbed. (Replace the cartridge when it is full.)
m Carrying Handles
When carrying the printer, have six people hold it by these handles under both sides.
n Maintenance Cartridge Cover
Open this cover to replace the Maintenance Cartridge.
o Stand
A stand that holds the printer. Equipped with casters to facilitate moving it.
p Stand L
The left leg of the Stand.
q Stand R
The right leg of the Stand.
r Top Stand Stay
Supports Stand L and Stand R. Attach the optional Media Take-up Unit to this part.
s Leg Covers
Covers for Stand L and Stand R.
t Stopper
Locks the Stand casters.
Always release the Stopper before moving the printer. Moving the printer while the Stopper is locked may
scratch the casters or the floor.
64
P.68
➔
P.51
➔
iPF830 Series
Basic Guide