Assembling Air Rail - TOHATSU TLDI 40 Service Manual

Assembling Air Rail

• Apply genunie engine oil to the O-rings.
Assemble the following components.
q Insert
w Seal ring
• Take care to install with insert q facing in the
proper direction as shown in View A to the right.
e Adapter
r Fuel injector
• Be sure to use the special tool when installing
the O rings in the fuel injector.
Special tool O-ring Setting Tool*
3T5-72870-0
*: Refer to Section 2-5 in chapter.
Assemble the following components.
q Fuel regulator
w Hose clamp
Special tool Crimping pliers*
3T5-72864-0
*: Refer to Chapter 2-5 in chapter.
e Air regulator
r Collar
t Plate
y Bolt
u Clamp
Replace with new one.
*
w
4-19
e
r
q
w
A View
correct incorrect
q
r
e
A
t
u
y