Inspecting Ffp - TOHATSU TLDI 40 Service Manual

Inspecting FFP

No.
1 Pipe grommet
2 Upper cable terminal grommet
3 Cable terminal grommet
4 O-rings
5 FFP Case
6 FFP assembly
7 Cable terminal assembly (+) (-)
Components
• Wear, deterioration and damage.
Replace if defects are detected.
• Clogging by foreign matter and water.
• Dirt and foreign matter on lower intake port.
• Cracks and damage on upper and lower plastic sections.
• Damage on flat terminal and plug terminal.
• Damage on wiring.
• Scratches or bending on terminals.
• Replace if defects are detected.
Points to check
4-25