TOHATSU TLDI 40 Service Manual page 72

Assemble the following components.
!3 Upper grommet
e Cable terminal grommet
e and !3
Grease to apply
Genuine engine oil
u Cable terminal (-): black cable
u Cable terminal (+): Red cable
terminals u
Grease to apply
Genuine engineoil
Connect to the flat connector cable terminal by lin-
ing up with the ± mark on the FFP.
Assemble the following components
!4 FFP cable
Attach cable to terminal by pressing firmly down
from above.
!5 Spacer (washer) : W5
!6 Cable covering
Take care not to pinch cable when closing cover.
!7 Bolt: type H510
Torque: 2.6 to 3.5 N-m: 0.27 to 0.36 kg-m:
2.0 to 2.6 lb-ft
4-27