Table of Contents
Advertisement
SC-P9000 Series/SC-P7000 Series/SC-P8000 Series/SC-P6000 Series User's Guide
Automatic color management
(SpectroProofer mounter)
With the SpectroProofer Mounter 24"/44" installed, you
can perform printing, drying, and color measurement
operations in sequence on roll paper. Another optional
color measurement device ILS30EP can be used for a
variety of color measurement conditions including the
new M1 standard. (Supports M0/M1/M2)
Also, the 44" model is up to two times faster than
conventional models, provides more accurate readings
with the addition of a function to prevent misaligned
measurement position, and realizes savings by reducing
the amount of paper used to print charts by half of the
conventional model ratio.
To use this you need commercially available RIP
software.
Efficient continuous printing on roll
paper (Auto take-up reel unit)
When using the optional auto take-up reel unit with the
SC-P9000 Series/SC-P8000 Series, roll paper can be
automatically wound up after printing for efficient
continuous printing.
"Using the Auto Take-up Reel Unit (SC-P9000
U
Series/SC-P8000 Series Only)" on page 43
Introduction
Notes on Usage and
Storage
Installation space
Make sure that you secure a space of at least 300 mm
around the entire printer, clear of any other objects, so
that paper ejection and consumable replacement are not
obstructed.
See the "Specifications Table" for the external
dimensions of the printer.
"Specifications Table" on page 183
U
Notes when using the printer
Note the following points when using this printer to
avoid breakdowns, malfunctions, and print quality
decline.
❏ When using the printer, observe the operating
temperature and humidity range described in the
"Specifications Table".
"Specifications Table" on page 183
U
Even when the conditions above are met, you may
not be able to print properly if the environmental
conditions are not suitable for the paper. Be sure to
use the printer in an environment where the paper's
requirements are met. For more details, see the
documentation supplied with the paper.
Also, when operating in dry areas, air conditioned
environment, or under direct sunlight, maintain
the appropriate humidity.
18
Advertisement
Table of Contents
