Before Printing On Commercially Available Paper - Epson SC-P9000 Series User Manual

SC-P9000 Series/SC-P7000 Series/SC-P8000 Series/SC-P6000 Series User's Guide
Thickness
*1 The printable area is 610 mm (24 inches).
"Cut Sheets Printable Area" on page 53
U
*2 762 mm for thick paper.
Supported paper widths for borderless printing (for roll paper and cut sheets)
Available for All models
254mm/10inch
300mm/11.8inch
Super A3/B/329 mm/13inch
406mm/16inch
When using the Epson Color Calibration Utility
Even if the specified conditions are met, you cannot use the following paper types.
❏ Paper that is thin and soft (plain paper and so on)
❏ Paper with an uneven print surface
❏ Paper that is colored or transparent
❏ Paper on which ink blurs or overflows when printing
❏ Paper which bends seriously during loading and printing
When performing color calibration for multiple printers, you can only use cut sheets A3 size or larger.
For one printer, you can use A3 size or larger roll paper as well as cut sheets.

Before Printing on Commercially Available Paper

Note:
❏ Be sure to check the paper characteristics (such as if the paper is glossy, the material, and the thickness) in the manual
provided with the paper or contact the dealer of the paper.
❏ Test the print quality with this printer before purchasing a large amount of paper.
When using non-Epson media (Custom Paper), make the paper configuration according to the paper characteristics
before printing. Printing without making configuring may cause wrinkles, rubbing, uneven colors, and so on.
Make sure you set the following three items.
Appendix
0.08 mm to 1.5 mm (0.5 mm to 1.5 mm for thick paper)
US C/ 432mm/17inch
B2/515 mm
A1/594mm
Super A1/610mm/24inch
Only for SC-P9000 Series/SC-P8000
Series
B1/728mm
Super A0/914mm/36inch
Super B0/1118mm/44inch
177