Epson SC-P9000 Series User Manual page 46

SC-P9000 Series/SC-P7000 Series/SC-P8000 Series/SC-P6000 Series User's Guide
A
Set the auto take-up reel unit Auto switch to Off.
Plug the power cord into an outlet and confirm
that the power lamp lights.
B
Press the P button to turn on the printer.
C
Check that the roll paper is correctly loaded in the
printer.
D
Check that the auto take-up reel unit icon is
displayed on the printer's screen.
If the icon is not displayed, check that the auto
take-up reel unit is connected correctly and is
turned on.
E
Press the l button on the printer, and then select
Roll Paper from the Paper Source menu.
F
Keep the d button on the printer pressed until
the end of the roll reaches the roll core.
Basic Operations
G
Tape the end to the roll core.
Place tape (available from third-party suppliers)
at the center and then at the left and right ends.
H
Keep the d button in the printer pressed until
you have fed enough paper for about three wraps
around the roll core.
I
Keep the Manual switch on the auto take-up reel
unit pressed to Backward to wrap the paper three
times around the core.
46