Table of Contents
Advertisement
SC-P9000 Series/SC-P7000 Series/SC-P8000 Series/SC-P6000 Series User's Guide
Option Setup
Item
SpectroProofer
SProofer Status
Device Version:ILS30
Calibration Tile S/N
Device Temperature
Firmware Version
Air Temperature
Backing Color
SProofer Setting
Auto Take-up Reel Unit
Network Setup
* Default setting
Item
IP Address Setting
IPv6 Setting
IEEE802.1x Setting
HTTPS Redirect Setting
Print Status Sheet
Using the Control Panel Menu
Description
You can check the current status of the SpectroProofer mounter installed
on the printer, and initialize the settings.
You can check the status of the SpectroProofer mounter.
Displays the version of the ILS30EP installed on the mounter.
Displays the calibration tile serial number of the ILS30EP installed on the
mounter.
Displays the temperature of the ILS30EP installed on the mounter.
Displays the version of the mounter.
Displays the air temperature around the mounter.
Displays the backing colors installed in the mounter. If the color differs
from the actual color, check the status of the backing and make sure it is
installed correctly. For details on installing the SpectroProofer mounter,
see the "Setup Guide" (booklet).
The printer automatically initializes the settings for the SpectroProofer
mounter. For details on procedures for initializing settings and so on, see
the "User's Guide" (PDF).
Displays the firmware version of the auto take-up reel unit installed on the
printer.
Description
*
Select whether to use DHCP to set the IP address (Auto), or to set the
Auto
address manually (Panel). Select Panel to enter the IP Address, Subnet
Mask, and Default Gateway. Contact your system administrator for
Panel
detailed information.
On
Select whether to enable or disable the IPv6 function.
*
Off
On
Select whether to enable or disable the IEEE802.1X function.
*
Off
*
Select whether to enable or disable the function to auto-direct HTTP to
On
HTTPS.
Off
Press the Z button to print a list of the Network Setup. Use this
information for a complete overview of network settings.
122
Advertisement
Table of Contents
