Cut Sheets Printable Area - Epson SC-P9000 Series User Manual

SC-P9000 Series/SC-P7000 Series/SC-P8000 Series/SC-P6000 Series User's Guide
*4 The printer driver supports the following
maximum paper lengths.
Windows: 15 m (590.6 inch)
Mac OS X: 15 m 24 cm (600 inch)
When printing on paper longer than this, you need
commercially available banner printing software.
In this situation, select Roll Paper (Banner) from
Source in the printer driver.
A D
to in the illustration indicates the margins at the
top, bottom, left, and right.
For borderless printing, the following values are set to 0
mm.
❏ Left and right borderless printing: B,
❏ Borderless printing on all sides: A, B, C,
Margins in other situations depends on the option
selected for Roll Paper Margin in the menus, as shown
in the table below.
Roll Paper Margin SettingsU
indicates factory default settings.
Roll Paper Margin
Parameter
Normal
Top15mm/Bottom15mm
Top35mm/Bottom15mm
Top150mm/Bottom15mm
3mm
Basic Operations
D
D
"Paper" on page 116
Margin Values
*
A,C=15 mm
B,D=3 mm
A,C=15mm
B,D=3 mm
A=35 mm
C=15mm
B,D=3 mm
A=150mm
C=15mm
B,D=3 mm
A,B,C,D=3 mm
Roll Paper Margin
Parameter
15mm
* When Normal is selected, the value for
for the following paper.
Premium Glossy Photo Paper (250)/Premium
Semigloss Photo Paper (250)/Premium Luster
Photo Paper (260)/Premium Semimatte Photo
Paper (260)
Also, when using Enhanced Adhesive Synthetic
Paper, the value for
c
Important:
❏ Printing is distorted when the trailing edge of
the roll paper comes off the core. Make sure the
trailing edge does not come inside the printing
area.
❏ The print size does not change even when the
margins are changed.

Cut Sheets Printable Area

The gray area in the illustration below shows the
printable area. The arrow in the illustration indicates the
direction of the ejected paper.
When printing borderless on the left and right, the left
and right margins are 0 mm.
*1 SC-P9000 Series/SC-P8000 Series
*2 SC-P7000 Series/SC-P6000 Series
53
Margin Values
A,B,C,D=15mm
A
is 20 mm
A
is 100 mm.