Roll Paper Adapter; Control Panel - Epson SC-P9000 Series User Manual

SC-P9000 Series/SC-P7000 Series/SC-P8000 Series/SC-P6000 Series User's Guide

Roll paper adapter

Use the supplied roll paper adapter when loading roll
paper onto the printer.
"Loading and Removing the Roll Paper" on
U
page 28
A
Size lever
Position according to the size of the roll core.
B
Adapter lock lever
Lift to unlock, lower to lock. Unlock when attaching
roll paper to the adapter, lock once the roll is
attached.
Introduction

Control panel

A
Power light
The printer's operational status is indicated by a lit or
flashing light
On :
Flashing :
Off :
B
Power button P
Turns the printer on or off.
C
Pause/Cancel button W
❏
The printer enters pause status if this is pressed while
printing. To release the pause status, press the W
button again, or select Pause Cancel on the screen
and then press the Z button. To cancel print jobs
being processed, select Job Cancel on the screen and
then press the Z button.
❏
Pressing this button while a menu is displayed closes
the menu and returns the printer to ready status.
D
Pause light
Indicates whether or not the printer is ready.
On : Cannot print. (The printer is paused, a job
is being canceled, a menu is displayed, an
error has occurred, and so on.)
Off : Ready to print.
E
Screen
12
The power is on.
The printer is receiving data or cleaning the
print head or performing other operations
in the course of being shut down.
The power is off.