Print Queues - Epson SC-P9000 Series User Manual

SC-P9000 Series/SC-P7000 Series/SC-P8000 Series/SC-P6000 Series User's Guide

Print Queues

This menu is only available when the optional hard disk unit is installed. When printing without using the printer
driver included with the printer, the job names and estimated times in the following table may not be displayed
correctly.
Item
Print Queue
XXXXXXXXXXX
(name of print queue)
Hold Queue
View Hold Queue
XXXXXXXXXXX
(name of hold
queue)
Resume All Jobs
Saved Job Queue
XXXXXXXXXXX
(name of stored job)
Using the Control Panel Menu
Description
Lists the estimated start time and time needed to print the selected job.
The reason that printing cannot be performed is displayed in Remote
Waiting Job Name
Manager or LFP HDD Utility, and you can hold or cancel the job.
User
"Function Summary" on page 57
U
Estimated Start
Time
Estimated Print
Time
Displays the print settings for held jobs and the reason the job is held.
Jobs that are held because the job print settings differ from those currently
selected for the printer can be printed as described below.
Paused Job Name
(1) Replace the paper and take whatever other steps may be necessary to
ready the device for printing.
User
(2) Select Resume All Jobs.
Paper Type
Source
Size
Reason For Hold
Press the Z button to resume all held jobs currently in the queue.
Shows the status of the selected stored job when it was last printed.
If you press the r button after confirmation, the File Options menu is
Stored Job Name
displayed.
User
When Print File is selected
Paper Length
A screen is displayed where you can enter the number of copies. When you
have entered the number of copies using the u/d buttons, the screen
Pages
switches to Estimated Print Time. Press the Z button to start printing.
Paper Type
When Delete is selected
Copies
A confirmation screen is displayed. Press the Z button to delete the job.
Source
Size
Estimated Print
Time
115