Spectroproofer Error - Epson SC-P9000 Series User Manual

SC-P9000 Series/SC-P7000 Series/SC-P8000 Series/SC-P6000 Series User's Guide
Messages
SP Connection Error
See manual and reconnect cables
of SpectroProofer Mounter to
printer.
SProofer Disconnected
SpectroProofer Mounter is not
recognized. Continue?
ILS30EP Error
See manual and reconnect ILS30EP
to SpectroProofer Mounter. Turn
printer off and on again.
ILS30EP Disconnected
ILS30EP is not recognized.
Continue?

SpectroProofer Error

See documentation for how to
solve the problem.
NN (where NN is the error number)
SpectroProofer Error
If SpectroProofer Error is displayed, see the two numbers at the end of the error number for the solution. See the
manual supplied with the mounter for more information on removing, cleaning, and installing, the mounter.
If this message appears on the LCD panel again, contact your dealer or Epson Support.
U See "Where To Get Help" on page 186
Error Number
01
Problem Solver
What to do
The optional SpectroProofer mounter (from here on, mounter) is not installed on the
printer correctly. Turn off the printer, and then reconnect the cables of the SpectroProofer
mounter correctly. Turn on the printer again after a short pause.
See the manual supplied with the mounter for more information on connecting cables.
The mounter is not connected to the printer correctly. Connect the cables of the mounter
correctly, and then select No to turn off the printer. Turn on the printer again after a short
pause.
See the manual supplied with the mounter for more information on connecting cables.
If you do not want to use the mounter, select Yes.
The optional color measurement device ILS30EP (from here on, ILS30EP) is not installed on
the mounter correctly. Turn off the printer, and then reconnect the cables of the ILS30EP
correctly. Turn on the printer again after a short pause.
See the manual supplied with the ILS30EP for more information on connecting cables.
The ILS30EP is not connected to the printer correctly. Connect the cables of the ILS30EP
correctly, and then select No to turn off the printer. Turn on the printer again after a short
pause.
See the manual supplied with the ILS30EP for more information on connecting cables.
If you do not want to use the mounter, select Yes.
The solution depends on the error number. See the following table.
"SpectroProofer Error" on page 142
U
What to do
The mounter is not installed correctly. Turn off the printer, remove the mounter, and then
install it again.
142