Stuart Turner Monsoon U1.5 bar Twin Installation Instructions Manual page 9

Pump Connections (General)
Integral pump isolating valve
shown in 'ON' position.
30°
Max.
permitted
flexible
hose
bend.
Do not kink or twist
the hose.
The pump should not be screwed down, ensure anti-vibration feet and flex hoses
are used.
Never operate pump with inlet and/or outlet isolating valves in the closed
position. Damage will occur!
22 mm copper inlet
pipework
Suction supply
from tank with
push-in plumbing
connection.
Integral pump isolating
valve shown in 'OFF'
position.
Flexible hose.
G¾ running nut with captive
sealing washer.
Vent plug.
Suction supply from tank
with G¾ male threaded
pump connection.
Pressure switch.
Inlet strainer housed
in this location (see
maintenance section).
Anti-vibration foot.
- 9 -
22 mm copper outlet
pipework.
In the case of horizontal feeds use a
22 mm compatible stem elbow (not
supplied). Do not bend the hose
more than 30° as they may become
damaged, transmit noise or leak.
22 mm flexible pipes
with push-in
connections, ensure
that connection is fully
pushed home into hose
end fitting and that hoses are kept as
straight as possible.
Isolating valve.
Flexible hose.
G¾ running nut with captive sealing
washer.
Delivery supply to shower/bathroom
fitted with G¾ male threaded pump
connection.
Flow switch.
Pump body.
Fig. 9