8.
Error messages and solutions
Error message
Setting locked !!
No addresses !!
Too many characters !!
PAPER JAM !!
REMOVE PAPER
POSITION ERROR !!
CHECK TOP MARGIN
ADDRESS TOO LONG
CHECK TOP MARGIN
CHANGE PRINTHEAD
PRINTHEAD ERROR !
VERIFY HEAD MOVEMENT
\text\da590\errormes
NO PAPER !!
NO INK !!
Cause
Configuration is blocked.
No addresses stored, hence
address cannot be repeated.
Address contains too many
characters, therefore it cannot
be repeated.
Out of paper.
Paper jam.
The first print line is outside
the paper format.
Address too long for the
paper or no form feed
detected
Print-head is empty.
Error in print-head transport
8.1
Solution
Select the option "Setting
locked:" "no" in programming
mode
Transmit data to printer.
Restrict the address size to 1.5
Kbytes.
Insert more forms (see Sec. 3).
Remove jammed paper, set up
paper feed again (see Sec. 3).
Reduce the "TOP MARGIN"
setting with the "ð " key or in
programming mode.
Sec. 5).
Reduce the "TOP MARGIN"
setting with the "ð " key or
make sure that the software is
sending a form feed.
Sec. 5).
Replace the print-head (see Sec.
4) or use reset if the print head
still has ink in it.
Switch printer off.
Check whether the head slide
has jammed.
Check the print-head fuses
(SI2)
DA590 Instruction Manual
(see
(see