Xinpu XP-G55B Handling Instructions Manual page 5

Demolition hammer
Table of Contents

Advertisement

Always wait until the power tool has come to a complete stop before placing it down. The tool
insert can jam and lead to loss of control over the power tool.
Do not use the power tool with a damaged cord. Do not touch the damaged cord and pill the
plug from the outlet when the cord is damaged while working. Damaged cords increase the
risk of an electric shock.
Connect power tools that are used in the open via a Ground Fault Circuit Interrupter
(GFCL).
Ear hearing protection. Exposure to noise can cause hearing loss.
Use the auxiliary handle supplied with the power tool. Loss of control over the power tool can
cause personal injury.
Use suitable detectors to determine of utility lines are hidden in the work area or call the local
utility company for assistance. Contact with electric lines can lead to fire and electric shock.
Damaging a gas line can lead to explosion. Penetrating a water line causes property damage or
may cause an electric shock.
Hold the power tool only by the insulated gripping surfaces when performing an operation
where the cutting tool may contact hidden wiring or its own power cord. Contact with a "live"
wire will also make exposed metal parts of the power tool "live" and shock the operator.
In case of damages the replacement of the plug or the supply cord shall always be carried out by
the manufacturer of the tool or his service organization
Residual risks
Even when the power tool is used as prescribed it is not possible to eliminate all residual
risk factors. The following hazards may arise in connection with the power tool's
construction and design:
a) Injuries and damage to property to due to broken accessories that are suddenly dashed.
b) Health defects resulting from vibration emission if the power tool is being used over longer
period of time or not adequately managed and properly maintained.
c) Lung damage if don't use dusk mask.
d) Hearing damage if don't use ear protection.
Warning! This power tool produces an electromagnetic field during operation. This field
may under some circumstances interfere with active or passive medical implants. To reduce the
risk of serious or fatal injury, we recommend persons with medical implants to consult their
physician and the medical implant manufacturer before operating this power tool.

Advertisement

Table of Contents
loading

Table of Contents