Mowing With Grass Collection - Hayter Harrier 56 340S Owner's Handbook Manual

OPERATING THE MOWER
1.21
1.21

MOWING WITH GRASS COLLECTION

The grassbag is designed to collect grass clippings.
For optimum performance, mow in dry conditions with the
throttle control set at 'fast'.
WARNING - PREVENT ACCIDENTS: ALWAYS check
the condition of the grassbag for signs of damage.
Replace a damaged grassbag immediately. DO NOT
operate the mower with a damaged grassbag. ALWAYS
stop the engine and disconnect the spark plug lead
CS112
before attempting to remove a grass blockage.
Grassbag attachment: Raise the rear deflector and hook
the grassbag over the raised lip at the rear of the mower
deck. Lower the grassbag to rest against the rear of the
mower. Finally lower the rear deflector to rest against the
top of the grassbag.
CS113
Grassbag removal: Raise the rear deflector and lift the
grassbag away from the mower. Finally lower the rear
deflector to rest against the rear of the mower.
CS114
CS115
Grassbag emptying: To empty the grassbag, pour out the
grass clippings and shake the grassbag vigorously to clean
the airways. Good grass collection depends on good air
flow through the grassbag. When collecting grass clippings
it is important that the grassbag is emptied regularly to pre-
vent blockages and engine overloading.
340222MT270999A