Mowing With Grass Collection - Hayter Ranger 53 Pro 396D Owner's Handbook Manual

Table of Contents

1.21

MOWING WITH GRASS COLLECTION

The grassbag is designed to collect grass clippings.

To achieve best grass collection performance, mow in dry operating

conditions.

Recognise that when the grassbag is full the airflow stops and the

grassbag deflates.

WARNING

- PREVENT ACCIDENTS : ALWAYS check the condition of the grassbag

for signs of damage. Replace a damaged grassbag immediately. DO NOT operate the

mower with a damaged grassbag. ALWAYS stop the engine and dis-

connect the spark plug lead before attempting to remove a grass

Grassbag attachment: Raise the rear deflector and lower the grass-

bag through the handlebar aperture to connect onto the upper

mounting points. Lower the grassbag to rest against the rear of the

mower. Ensure grassbag flap is closed. Finally lower the rear

deflector to rest against the top of the grassbag.

Grassbag removal: Raise the rear deflector and lift the grassbag

through the handlebar aperture and away from the mower. Finally

lower the rear deflector to rest against the rear of the mower.

Grassbag emptying: To empty the grassbag, pour out the grass

clippings and shake the grassbag vigorously to clean the airways.

Good grass collection depends on good air flow through the

grassbag. When collecting grass clippings it is important that the

grassbag is emptied regularly to prevent blockages and engine

overloading.

OPERATING THE MOWER

1.21

CS228

CS221

CS220

Table of Contents