Mowing With Grass Collection - Hayter Ranger 53 Pro Owner's Handbook Manual

1.19

MOWING WITH GRASS COLLECTION

The grassbag is designed to collect grass clippings.
To achieve best grass collection performance, mow in dry operating
conditions.
Recognise that when the grassbag is full the airflow stops and the
grassbag deflates.
WARNING - PREVENT ACCIDENTS : ALWAYS check the condition of the grassbag
for signs of damage. Replace a damaged grassbag immediately. DO NOT operate the
mower with a damaged grassbag. ALWAYS stop the engine and dis-
connect the spark plug lead before attempting to remove a grass
Grassbag attachment: Raise the rear deflector and lower the grass-
bag through the handlebar aperture to connect onto the upper
mounting points. Lower the grassbag to rest against the rear of the
mower. Ensure grassbag flap is closed. Finally lower the rear
deflector to rest against the top of the grassbag.
Grassbag removal: Raise the rear deflector and lift the grassbag
through the handlebar aperture and away from the mower. Finally
lower the rear deflector to rest against the rear of the mower.
Grassbag emptying: To empty the grassbag, pour out the grass
clippings and shake the grassbag vigorously to clean the airways.
Good grass collection depends on good air flow through the
grassbag. When collecting grass clippings it is important that the
grassbag is emptied regularly to prevent blockages and engine
overloading.
OPERATING THE MOWER 1.19
CS228
CS221
CS220
396007AMT1004020