Mowing With Grass Collection - Hayter 481S Owner's Handbook Manual

Table of Contents

OPERATING THE MOWER

1.20

MOWING WITH GRASS COLLECTION

The grassbag is designed to collect grass clippings.

For optimum performance, mow in dry conditions with the

throttle control set at 'fast'.

WARNING - PREVENT ACCIDENTS: ALWAYS check

the condition of the grassbag for signs of damage.

Replace a damaged grassbag immediately. DO NOT

operate the mower with a damaged grassbag. ALWAYS

stop the engine and disconnect the spark plug lead

CS017

before attempting to remove a grass blockage. Ensure

the rear grass deflector is sitting on the grassbag cor-

rectly.

Grassbag attachment: Raise the rear deflector. Lower the

grassbag through the handlebar and hook in position behind

the deflector springs. Lower the grassbag to rest against the

rear of the mower. Finally, lower the rear deflector to rest

against the top of the grassbag.

CS007

Grassbag removal: Raise the rear deflector and lift the

grassbag through the handlebar. Finally lower the rear

deflector to rest against the rear of the mower.

CS010

Grassbag emptying: To empty the grassbag, pour out the

grass clippings and shake the grassbag vigorously to clean

the airways. Good grass collection depends on good air

flow through the grassbag. When collecting grass clippings

it is important that the grassbag is emptied regularly to pre-

vent blockages and engine overloading.

481141EB030299A

Table of Contents

Harrier 48