Assembling The Mower For The First Time - Hayter Harrier 56 340S Owner's Handbook Manual

1.12

ASSEMBLING THE MOWER FOR THE FIRST TIME

Check that parts are delivered correctly: Remove the
mower from the packaging and check that all loose items
have been supplied correctly. Refer to the delivery check-
list opposite and the general assembly. If any items are
missing contact, your local Hayter dealer.
Assemble the handlebar: Unscrew the knobs securing the
handlebar sufficiently to allow it to be pivoted. Move the
engine stop lever away from the engine to avoid damage
and unfold the handlebar to its operating position. Tighten
the two knobs to secure the handlebar.
IMPORTANT - PREVENT DAMAGE : When unfold-
ing the handlebar, take care to ensure that the controls
and cables do not become damaged. Always replace
damaged controls and cables before using the mower.
Assemble the grassbag: Remove the long ribbon label
(when fitted) by cutting it off close to the grassbag. Discard
the ribbon label.
WARNING - AVOID ENTANGLEMENT : Completely
remove this ribbon before using the mower
Raise the rear deflector and hook the grassbag over the
raised lip at rear of the mower deck. Lower the grassbag to
rest against the rear of the mower. Finally lower the rear
deflector to rest against the top of the grassbag.
ASSEMBLY INSTRUCTIONS
DELIVERY CHECKLIST
DESCRIPTION
Grassbag
Owner's Handbook
Charger
Ignition Key
Warranty Registration Card
CS097
340222MT270999A
1.12
QTY
340S 341S
1
1
1
1
0
1
0
1
1
1
CS111
CS112
CS113